Water Wisely
Lift it. Grip it.
Fix it.
Lift + Grip takes the fight out of sprinkler maintenance to save hands, time, and water.
Protected by 3 patents
Lift + Grip takes the fight out of sprinkler maintenance to save hands, time, and water.
Protected by 3 patents
Anyone who has serviced a pop-up sprinkler knows the drill — hold the tube up against the spring, don't let it slip, and somehow also do the actual work.
Fighting the spring tension to keep the tube raised while trying to unscrew a nozzle is a recipe for frustration and minor injuries.
Sand, grit, and debris partially block filters and nozzle openings, throwing off spray patterns. One area floods while another dries out — and most people just run the system longer to compensate.
When you need both hands just to hold the sprinkler, a two-minute filter swap turns into a ten-minute ordeal — or you give up and walk away.
The angled tip slides under the sprinkler riser and lifts it from its housing with a natural, controlled motion — no prying, no fingernail damage.
Engage the precision clamping bay and the tube stays raised against full spring pressure. No wobble, no slipping — both hands are now free.
Clean or replace the filter. Swap the nozzle. Make adjustments. Set the tool down and go get parts. Lift + Grip holds everything while you work.
Two seconds to lift the riser, two seconds to lock it. Then walk away — both hands free, tool doing the work.
From routine filter cleans to full nozzle replacements, Lift + Grip handles the holding so you can focus on the fix.
From tip geometry to clamping force, the design reflects how sprinkler maintenance actually happens in the field.
Once locked, the tube stays raised on its own. Set the tool down, walk to your truck for parts, and come back — it'll still be holding.
Precision-machined to work across the full range of standard and large pop-up sprinkler diameters. It just works, every time.
Reinforced ABS/fiberglass composite with coated metal hardware. Water-resistant, impact-resistant, and built to live in a tool bag.
Keeping filters clean and nozzles clear is the only way to guarantee even coverage. Lift + Grip makes that maintenance easy enough to actually do regularly.
Pressure irrigation systems carry small particles of sand, grit, and organic debris. Over time, these accumulate inside filters and nozzle openings.
Even a partial blockage throws off the spray arc enough to create dry spots and saturated patches within the same zone. Most homeowners respond by running the system longer — which only makes the problem worse. A clean nozzle delivers even coverage at the right flow rate, which means less water used and better results.
A well-maintained sprinkler system is one of the most practical steps any homeowner or landscaping professional can take for water conservation. The challenge has always been that maintenance is tedious and difficult. Lift + Grip exists to remove that barrier — so the work actually gets done.
Less waste. Better coverage. Greener results.Both models deliver the same hands-free sprinkler control — Lift + Grip Max handles larger commercial and residential heads.
Compatible with:
Compatible with:
We work with irrigation suppliers, landscaping distributors, and hardware retailers. If you're interested in wholesale pricing or becoming a retail partner, we'd love to hear from you.
Get in Touch →